Concrete Solutions

  • Concrete Cure Seals

    Concrete Cure Seals (2)

  • Concrete Densifier

    Concrete Densifier (10)

  • Concrete Sealer

    Concrete Sealer (10)

  • Concrete Wax | Cleaner

    Concrete Wax | Cleaner (10)

  • (4) 1 Gallon Jugs (Case) of Kemiko Neutra Clean Concrete Stone Cleaner Dirt Gone Concrete

    $75.00

    (4) 1 Gallon Jugs (Case)

    **Free Shipping to Inner 48 United States**

    Benefits Include:

    *LEED Compliant
    *Low Odor – Low VOC
    *Excellent All Purpose Cleaner

    Commonly Found In:

    *Kitchens
    *Grocery Stores
    *Restaurants
    *Walkways
    *Interior and Exterior Surfaces Requiring Cleaning

  • (4) Case Kemiko 1 Gallon Easy Shine Mop On Wax Protects Rich Shine Sealed Concrete Floor

    $175.00

    Case of 4 – 1 Gallon – Kemiko Easy Shine Acrylic Polymer Liquid Wax (Mop On)

    KEMIKO® EASY SHINE is a low-VOC, extremely user-friendly, waterborne acrylic polymer wax for protecting and maintaining sealed concrete and many other finished substrates. KEMIKO® EASY SHINE is a single component product that is designed to repel water, reduce scuffing and marring. KEMIKO® EASY SHINE allows substrate to breath, is low odor, and produces a deep rich shine.

    Applications
    KEMIKO® EASY SHINE is applied to properly prepared KEMIKO® or Rembrandt stained floors sealed with KEMIKO® STONE TONE SEALER II, KEMIKO® 100% Solids and Water Base Epoxies, KEMIKO®  SS2700 WB Polyurethane, KEMIKO® SS3300 Aliphatic Polyaspartic and is compatible with many other sealed concrete products. Typical applications include commercial kitchens, grocery stores, restaurants, showroom floors, walkways, and many other interior surfaces requiring additional protection. Excellent replacement product for high VOC solvent base water repellents and sealers with excellent wetting properties. It is not to be applied over KEMIKO® BUFF-ON WAX II.

    Surface Preparation Finished Floor
    All visible oil, grease, sludge, stain residue and any other contaminants shall be removed prior to any KEMIKO® EASY SHINE application. Surface shall be cured, dry and free from any deleterious matter or grime. Use KEMIKO® EASY STRIP to remove heavy wax build up, grease, oils and grime.

     

  • 1 Gallon Concentrate of Xtreme Clean Concrete Stone Cleaner Dirt Gone Bright Concrete

    $62.44
    1 Gallon OF XTREME CLEAN Concentrate
    Xtreme Clean is a unique cleaning product that combines cleansing action with Colloidal Silica. It adds extra protection to the concrete surface while it cleans. It is recommended as part of regular floor maintenance for maximum value. Be sure to offer it to your customers to optimize the appearance of their gorgeous polished floors.
    • Dilute 4 oz. for each gallon of water.
    • Dilute 8 oz. for extra dirty floors.
  • 1 Gallon of Kemiko Neutra Clean Concrete Stone Cleaner Dirt Gone Concrete

    $27.44

    Benefits Include:

    *LEED Compliant
    *Low Odor – Low VOC
    *Excellent All Purpose Cleaner

    **Free Shipping Inner 48 United States**

    Commonly Found In:

    *Kitchens
    *Grocery Stores
    *Restaurants
    *Walkways
    *Interior and Exterior Surfaces Requiring Cleaning

  • 32 Ounces of Xtreme Clean Concrete Cleaner Stone Cleaner Dirt Gone Bright Floors

    $22.44
    32 OUNCES OF XTREME CLEAN
     
    Xtreme Concrete Stone Cleaner is a unique cleaning product that combines cleansing action with Colloidal Silica. It adds extra protection to the concrete surface while it cleans. It is recommended as part of regular floor maintenance for maximum value. Be sure to offer it to your customers to optimize the appearance of their gorgeous polished floors.
    • Coverage: 1000 square feet per gallon of working solution.
    • Dilute 4 oz. for each gallon of water. 8 oz. for extra dirty floors.
  • 5 Gallons Ameripolish 3D High Solids Concrete Densifier Protect Concrete Floors

    $300.00 $245.00

     5 Gallon Container

    Keep Concrete Looking New (More potent then the other densifier HSL)

    AmeriPolish developed 3D Hybrid Silicate Densifier to help keep
    concrete look newer longer. Penetrating deep into concrete, 3D Hybrid
    Silicate Densifier improves surface performance and resists harmful
    effects of traffic wear and weathering. High penetration densifiers can
    improve performance of both new and aged concrete. 3D Hybrid Silicate
    Densifier will help in rejuvenating old or aged concrete. 3D Densifier
    can also be used with integrally colored cements.

    USES: Ameripolish 3D Multiple Level Densifier can be used by itself or with Ameripolish dyes and stain protectors.
    • Hardens concrete surfaces
    • Prepares surface for high gloss diamond polishing
    • Locks in dyes for longer lasting color
    • Improves resistance to staining
    • Improves scratch resistance
    • Reduces abrasion patterns
    • Reduces loss of concrete from wear

    FEATURES:
    • Can be applied over new or existing concrete
    • Penetrates fast for a deep seal
    • Hardens deep to improve durability even after grinding
    • Contains UV stabilizers to help protect color from fading
    • Surfaces wear better & last longer
    • Enhances polished color, gloss & clarity
    • Helps prevent stains from penetrating
    • Minimizes dust for healthier indoor air quality (IAQ)

     

  • 5 Gallons Ameripolish 3D Low Solids Concrete Densifier

    $200.00 $145.00

     

     

    5 Gallon Container

    Keep Concrete Looking New (Less potent then the other densifier HS)

    AmeriPolish developed 3D Hybrid Silicate Densifier to help keep
    concrete look newer longer. Penetrating deep into concrete, 3D Hybrid
    Silicate Densifier improves surface performance and resists harmful
    effects of traffic wear and weathering. High penetration densifiers can
    improve performance of both new and aged concrete. 3D Hybrid Silicate
    Densifier will help in rejuvenating old or aged concrete. 3D Densifier
    can also be used with integrally colored cements.

    USES: Ameripolish 3D Multiple Level Densifier can be used by itself or with Ameripolish dyes and stain protectors.
    • Hardens concrete surfaces
    • Prepares surface for high gloss diamond polishing
    • Locks in dyes for longer lasting color
    • Improves resistance to staining
    • Improves scratch resistance
    • Reduces abrasion patterns
    • Reduces loss of concrete from wear

    FEATURES:
    • Can be applied over new or existing concrete
    • Penetrates fast for a deep seal
    • Hardens deep to improve durability even after grinding
    • Contains UV stabilizers to help protect color from fading
    • Surfaces wear better & last longer
    • Enhances polished color, gloss & clarity
    • Helps prevent stains from penetrating
    • Minimizes dust for healthier indoor air quality (IAQ)

     

     

  • 5 Gallons Concentrate of Xtreme Clean Concrete Stone Cleaner Dirt Gone Bright Concrete

    $192.50
    5 Gallons OF XTREME CLEAN Concentrate
    Xtreme Clean is a unique cleaning product that combines cleansing action with Colloidal Silica. It adds extra protection to the concrete surface while it cleans. It is recommended as part of regular floor maintenance for maximum value. Be sure to offer it to your customers to optimize the appearance of their gorgeous polished floors.
    • Dilute 4 oz. for each gallon of water.
    • Dilute 8 oz. for extra dirty floors.
  • Ameripolish 1 Gallon Colorjuice Brick Paver Sealer PSE

    $30.50

    Ameripolish WB Paver Sealer
    has been formulated to rejuvenate and enhance the original color of
    pavers, concrete replications and stone. It is also designed to give
    long lasting protection by repelling water and blocking UV degradation.
    Ameripolish WB Paver Sealer is a blend of water based high performance
    polymer. Working together they form a breathable barrier that protects
    cementitious materials from salts, stains, dirt, oils and moisture. This
    sealer helps protect surfaces from damaging weather conditions and will
    help prolong life by sealing out moisture, dirt and salts season after
    season. The key to long lasting beauty is to protect while not forming a
    film that can peel, crack or blister. Ameripolish WB Sealer does just
    that. It is the product to choose when sealing interlocking pavers,
    colored cementitious replications, stone, and other cement textured
    surfaces.

  • Ameripolish SR2 Stain Protector Resistor Repels Oil and Water

    $150.00$750.00

    Ameripolish SR2 Stain Protector and Resistor 

    Available in 1 and 5 Gallons

    The water and oil repelling qualities of Ameripolish® SR2™ Sub-surface Stain Resistor2 provides superior stain protection on most substrates. With a small molecular structure, maximum penetration is assured. Penetration depth is controlled by the application rate, or loading rate. This makes SR2™ ideal for protecting polished concrete and other dense, color-sensitive surfaces. Moisture and water-carried salts are blocked, minimizing chlorides and surface erosion.

    Ameripolish® SR2™ is part of a two-component Penetrating stain repellent specifically formulated to protect polished, dyed and non-dyed concrete from oil, water-based stains and acidic etching agents. Designed specifically for protecting non colored and colored polished concrete floor. To obtain optimum performance, Ameripolish® SR2™ is to be used with Ameripolish®
    3D (HS or HSL) Densifier. Ameripolish® SR2™ can also be used with dyes and densifiers from other manufacturers; however, optimum stain resistance and color retention cannot be assured.

  • Ameripolish X Link Interior and Exterior Concrete Sealer

    $35.44$179.44

    Ameripolish X-Link Stain Protector and Sealer

    Available in One Gallon & Five Gallon Containers


    AmeriPolish X-Link WB Surface Sealer
    Sealer and stain protector for exterior and interior concrete. X-Link
    WB Surface Sealer™ is a fast drying water-based sealer that protects
    and beautifies decorative concrete. X-Link is designed for use with
    ColorJuice3D® Concrete Colorant Concentrate, but may also be used on
    uncolcored concrete or with other compatible color products, in both
    exterior and interior applications. It is ideal for any concrete finish
    including porous finishes such as broomed, stamped, and
    exposed-aggre-gate concrete, concrete masonry and other cementitious
    surfaces, as well as porous brick, natural and manufactured stone,
    stucco, slate, unglazed tile, and flagstone.

    • Exterior and interior applications
    • Penetrating and durable
    • Satin Finish
    • Non-Yellowing
    • UV Resistant
    • Satin Finish
    • Fast application, 1 hour drying between coats.
    • Fast curing, 12 hours for foot traffic, 24 hours for heavy traffic
    • Can be applied to most cementitious surfaces and other unglazed stone and masonry surfaces
    • Easy to clean and maintain
    COVERAGE: X-Link WB Surface Sealer will cover approximately 400-600
    square feet per gallon (10–15 m2/L) depending upon porosity of the
    surface.
  • Concrete Densifier & Sealer Package Deal Covers 2500 Sq ft. Strengthen Protect

    $330.00

    Your floor is important, this kit not only dust-proofs and strengthens your floor it also is guaranteed to make your floor more shiny and more durable. In this package you get enough densifier and sealer to cover 2500 sq ft. When it comes to your floor and your health using professional products will save you time and money in the long run.

     

    ABOUT THE PRODUCT

     

    Xtreme Hard™(Densifier) is a highly reactive Colloidal Silica-based
    densifying agent. The Colloidal Silica molecule has more reactive sites, so it
    goes to work quickly, within 1-2 minutes. Spray it on the concrete until the
    surface is saturated, then agitate with a soft bristle broom. Wait until
    dry (45-60mins).

    Xtreme Hard™ is a green, clean and
    safe material. Its low pH formula (pH approx 8.7, only slightly higher than
    baking soda) is safer for you to handle. Xtreme Hard emits no Volatile Organic
    Compounds (VOCs) and eliminates the hazardous-material disposal, so it’s better
    for the job site and friendlier to the planet.  Xtreme Hard is shipped as
    a concentrate. One gallon of concentrate makes five gallons of ready-to-use
    product. Xtreme Hard is the lowest cost densifier per square foot. New Improved
    Nano Technology Formula, penetrates deeper into the concrete.

    Coverage: 1 Gallon of concentrate makes 5 gallons of ready-to-use product which will cover 2,500 Square Feet.

    ____________________________________________________________________________________________________________________________________________________________________

     

    Xtreme Shield™(Sealer) is a finishing conditioner applied after polishing. It introduces additional Colloidal Silica to the slab, along with a thin, clear polymer layer that gives extra protection to the slab surface.

    It brings out the color in integrally pigmented, stained or dyed concrete, giving a slight “wet look” that works excellently with exposed aggregate.

    The polymer provides extra protection against accidental staining from spills. It is particularly useful against mild acids, such as might be encountered in environments where food is handled or served.

    Provides enhanced water repellent, stain resistance and gloss development.

    Coverage: 1 Gallon concentrate makes 2 Gallons of usable sealer. This 1 Gallon container will give you 3,000 Square Feet of coverage. (Just add water)

     

    Apply as thinly as possible with a microfiber pad.

     

  • Gone Concrete Remover 32oz Clean Tools Trucks W/ Concrete Build Up Eco Friendly Safe

    $22.44

    32oz Gone Concrete Remover

    ABOUT THE PRODUCT:
    GONE tm is a heavy duty remover of concrete, mortar and cement residues. The product is very useful for cleaning concrete mixer trucks, tools, etc. GONE is also useful for removing these residues from equipment such as concrete buggies, mortar and cement mixers.

    DIRECTIONS OF USE:
    To remove hardened built-up concrete residues, spray undiluted GONE directly on DRY residues. Saturate the residues thoroughly. Allow product to work for at least 15-20 minutes or until residues soften. Remove with a brush or high pressure water rinse. For larger equipment I would suggest using a power washer with some sort of fine tip to remove hard residue.

    SAFETY AND HANDLING:
    Product may cause eye or skin irritation. If contact occurs, flush area with 15 minutes. If ingested seek medical attention. Do not mix with any other chemicals other than water.

  • Kemiko 1 Gallon Easy Shine Mop On Wax Protects Rich Shine Sealed Concrete Floor

    $45.00

    1 Gallon – Kemiko Easy Shine Acrylic Polymer Liquid Wax (Mop On)

    KEMIKO® EASY SHINE is a low-VOC, extremely user-friendly, waterborne acrylic polymer wax for
    protecting and maintaining sealed concrete and many other finished substrates. KEMIKO® EASY
    SHINE is a single component product that is designed to repel water, reduce scuffing and marring.
    KEMIKO® EASY SHINE allows substrate to breath, is low odor, and produces a deep rich shine.

    Applications
    KEMIKO® EASY SHINE is applied to properly prepared KEMIKO® or Rembrandt stained floors sealed with KEMIKO® STONE TONE SEALER II, KEMIKO® 100% Solids and Water Base Epoxies, KEMIKO® SS2700 WB Polyurethane, KEMIKO® SS3300 Aliphatic Polyaspartic and is compatible with many other sealed concrete products. Typical applications include commercial kitchens, grocery stores, restaurants, showroom floors, walkways, and many other interior surfaces requiring additional protection. Excellent replacement product for high VOC solvent base water repellents and sealers with excellent wetting properties. It is not to be applied over KEMIKO® BUFF-ON WAX II.

    Surface Preparation Finished Floor
    All visible oil, grease, sludge, stain residue and any other contaminants shall be removed prior to any KEMIKO® EASY SHINE application. Surface shall be cured, dry and free from any deleterious matter or grime. Use KEMIKO® EASY STRIP to remove heavy wax build up, grease, oils and grime.

  • Kemiko 4 – 1 Gallon Containers of Buff On Wax Protects Rich Shine Sealed Concrete Floor

    $200.44

    THIS IS FOR ONE BOX OF FOUR 1 GALLON CANS OF KEMIKO® STONE TONE BUFF ON WAX II

    KEMIKO® STONE TONE BUFF ON WAX II is a wax that is designed for interior use over KEMIKO® STONE TONE STAIN, pigmented colored concrete, tile, brick, or any masonry surface.

    Water based
    Benefits Include:
    • Durability
    • High Protection
    • LEED Compliant
    • Satin Finish

  • Kemiko Stone Tone Sealer II (Clear Gloss, Flat, Satin Finish)

    $56.44$264.44

    KEMIKO® STONE TONE SEALER II is a high performance waterborne, water viscosity, low VOC, single component acrylic urethane polymer sealer that is very user friendly and is designed to provide resistance to water, alkali, acids, UV light, and staining. The product is Non-Yellowing concrete floor coating. Available in clear gloss, flat and satin finish.

    Covers 300 – 400 Square Feet

    Benefits Include:

    • Excellent Chemical Resistance
    • Excellent Replacement for High VOC Lacquers, Acrylic and Varnishes
    • Excellent Leveling and Flow Properties
    • Fast Cure
    • LEED Compliant
    • Low Odor – Low VOC

    Commonly Found In:

    • Shopping Malls
    • Schools
    • Hospitals

  • WR Meadows VOCOMP-25 Concrete Curing and Sealing Compound [5 Gallons]

    $195.44

    WR Meadows VOCOMP-25 – Concrete Curing & Sealing Compound

    VOCOMP-25 – Concrete Curing and Sealing Compound

    Water-Based, Acrylic Concrete Curing and Sealing Compound

    DESCRIPTION
    VOCOMP-25 water-based acrylic concrete sealer is a ready-to-use concrete curing and sealing compound formulated of special acrylic polymers in a true water-based carrier. VOCOMP-25 provides improved resistance to rain, sun, freezing temperatures, most acids and industrial chemicals, petroleum, deicing salts, cleaning agents (except aromatic solvents), diluted caustics, and other pollutants.

    VOCOMP-25 appears milky white in the container and, when first applied, leaves a bluish cast on the concrete for easy visual coverage. VOCOMP-25 dries clear to provide a transparent sheen finish. This sheen can be controlled by the number of coats applied.

    USES

    VOCOMP-25 may be used wherever a medium-to-high sheen is desired to bring out the natural beauty of concrete without discoloring, checking, or peeling. It may be applied to simultaneously cure, seal, and dustproof new, old, interior, exterior, horizontal, and vertical concrete surfaces. VOCOMP-25 is ideal for curing, sealing, and dustproofing driveways, sidewalks, patios, swimming pool areas, and commercial and industrial floors. Horizontal surfaces protected with VOCOMP-25 offer excellent wearing qualities for foot and vehicular traffic. If, after prolonged usage, traffic patterns appear, the surface can be washed clean and recoated to restore the original beauty. Good concrete and good concreting practices should be followed, as VOCOMP-25 is not a cure-all for improperly mixed or placed concrete.

Theme Settings