Concrete Sealer

  • Ameripolish 1 Gallon Colorjuice Brick Paver Sealer PSE

    $30.50

    Ameripolish WB Paver Sealer
    has been formulated to rejuvenate and enhance the original color of
    pavers, concrete replications and stone. It is also designed to give
    long lasting protection by repelling water and blocking UV degradation.
    Ameripolish WB Paver Sealer is a blend of water based high performance
    polymer. Working together they form a breathable barrier that protects
    cementitious materials from salts, stains, dirt, oils and moisture. This
    sealer helps protect surfaces from damaging weather conditions and will
    help prolong life by sealing out moisture, dirt and salts season after
    season. The key to long lasting beauty is to protect while not forming a
    film that can peel, crack or blister. Ameripolish WB Sealer does just
    that. It is the product to choose when sealing interlocking pavers,
    colored cementitious replications, stone, and other cement textured
    surfaces.

  • Ameripolish SR2 Stain Protector Resistor Repels Oil and Water

    $150.00$750.00

    Ameripolish SR2 Stain Protector and Resistor 

    Available in 1 and 5 Gallons

    The water and oil repelling qualities of Ameripolish® SR2™ Sub-surface Stain Resistor2 provides superior stain protection on most substrates. With a small molecular structure, maximum penetration is assured. Penetration depth is controlled by the application rate, or loading rate. This makes SR2™ ideal for protecting polished concrete and other dense, color-sensitive surfaces. Moisture and water-carried salts are blocked, minimizing chlorides and surface erosion.

    Ameripolish® SR2™ is part of a two-component Penetrating stain repellent specifically formulated to protect polished, dyed and non-dyed concrete from oil, water-based stains and acidic etching agents. Designed specifically for protecting non colored and colored polished concrete floor. To obtain optimum performance, Ameripolish® SR2™ is to be used with Ameripolish®
    3D (HS or HSL) Densifier. Ameripolish® SR2™ can also be used with dyes and densifiers from other manufacturers; however, optimum stain resistance and color retention cannot be assured.

  • Ameripolish X Link Interior and Exterior Concrete Sealer

    $35.44$179.44

    Ameripolish X-Link Stain Protector and Sealer

    Available in One Gallon & Five Gallon Containers


    AmeriPolish X-Link WB Surface Sealer
    Sealer and stain protector for exterior and interior concrete. X-Link
    WB Surface Sealer™ is a fast drying water-based sealer that protects
    and beautifies decorative concrete. X-Link is designed for use with
    ColorJuice3D® Concrete Colorant Concentrate, but may also be used on
    uncolcored concrete or with other compatible color products, in both
    exterior and interior applications. It is ideal for any concrete finish
    including porous finishes such as broomed, stamped, and
    exposed-aggre-gate concrete, concrete masonry and other cementitious
    surfaces, as well as porous brick, natural and manufactured stone,
    stucco, slate, unglazed tile, and flagstone.

    • Exterior and interior applications
    • Penetrating and durable
    • Satin Finish
    • Non-Yellowing
    • UV Resistant
    • Satin Finish
    • Fast application, 1 hour drying between coats.
    • Fast curing, 12 hours for foot traffic, 24 hours for heavy traffic
    • Can be applied to most cementitious surfaces and other unglazed stone and masonry surfaces
    • Easy to clean and maintain
    COVERAGE: X-Link WB Surface Sealer will cover approximately 400-600
    square feet per gallon (10–15 m2/L) depending upon porosity of the
    surface.
  • Concrete Densifier & Sealer Package Deal Covers 2500 Sq ft. Strengthen Protect

    $330.00

    Your floor is important, this kit not only dust-proofs and strengthens your floor it also is guaranteed to make your floor more shiny and more durable. In this package you get enough densifier and sealer to cover 2500 sq ft. When it comes to your floor and your health using professional products will save you time and money in the long run.

     

    ABOUT THE PRODUCT

     

    Xtreme Hard™(Densifier) is a highly reactive Colloidal Silica-based
    densifying agent. The Colloidal Silica molecule has more reactive sites, so it
    goes to work quickly, within 1-2 minutes. Spray it on the concrete until the
    surface is saturated, then agitate with a soft bristle broom. Wait until
    dry (45-60mins).

    Xtreme Hard™ is a green, clean and
    safe material. Its low pH formula (pH approx 8.7, only slightly higher than
    baking soda) is safer for you to handle. Xtreme Hard emits no Volatile Organic
    Compounds (VOCs) and eliminates the hazardous-material disposal, so it’s better
    for the job site and friendlier to the planet.  Xtreme Hard is shipped as
    a concentrate. One gallon of concentrate makes five gallons of ready-to-use
    product. Xtreme Hard is the lowest cost densifier per square foot. New Improved
    Nano Technology Formula, penetrates deeper into the concrete.

    Coverage: 1 Gallon of concentrate makes 5 gallons of ready-to-use product which will cover 2,500 Square Feet.

    ____________________________________________________________________________________________________________________________________________________________________

     

    Xtreme Shield™(Sealer) is a finishing conditioner applied after polishing. It introduces additional Colloidal Silica to the slab, along with a thin, clear polymer layer that gives extra protection to the slab surface.

    It brings out the color in integrally pigmented, stained or dyed concrete, giving a slight “wet look” that works excellently with exposed aggregate.

    The polymer provides extra protection against accidental staining from spills. It is particularly useful against mild acids, such as might be encountered in environments where food is handled or served.

    Provides enhanced water repellent, stain resistance and gloss development.

    Coverage: 1 Gallon concentrate makes 2 Gallons of usable sealer. This 1 Gallon container will give you 3,000 Square Feet of coverage. (Just add water)

     

    Apply as thinly as possible with a microfiber pad.

     

  • Kemiko Stone Tone Sealer II (Clear Gloss, Flat, Satin Finish)

    $56.44$264.44

    KEMIKO® STONE TONE SEALER II is a high performance waterborne, water viscosity, low VOC, single component acrylic urethane polymer sealer that is very user friendly and is designed to provide resistance to water, alkali, acids, UV light, and staining. The product is Non-Yellowing concrete floor coating. Available in clear gloss, flat and satin finish.

    Covers 300 – 400 Square Feet

    Benefits Include:

    • Excellent Chemical Resistance
    • Excellent Replacement for High VOC Lacquers, Acrylic and Varnishes
    • Excellent Leveling and Flow Properties
    • Fast Cure
    • LEED Compliant
    • Low Odor – Low VOC

    Commonly Found In:

    • Shopping Malls
    • Schools
    • Hospitals

  • Xtreme Shield Concrete Sealer, Enhancer and Protector Designed for polished concrete

    $45.75$7,544.00

    Xtreme Shield™ is a finishing conditioner applied after polishing. It introduces additional Colloidal Silica to the slab, along with a thin, clear polymer layer that gives extra protection to the slab surface.

    It brings out the color in integrally pigmented, stained or dyed concrete, giving a slight “wet look” that works excellently with exposed aggregate.

    The polymer provides extra protection against accidental staining from spills. It is particularly useful against mild acids, such as might be encountered in environments where food is handled or served.

    Provides enhanced water repellency, stain resistance and gloss development.

    1:2 Mix Ratio Just ADD Water!

Theme Settings

Happy Holidays!..Fast Free Shipping! No Minimum Order To Inner 48 States!
Hello. Add your message here.