Diamondblades4us

Leading U.S Wholesaler Of Diamond Saw Blades

dust collector

  • 4"/ 5" DustBuddie Dust Shroud Kit Fits All Major Brands Angle Grinders

    $99.95

    DustBuddie™ Shroud
    *Fits most 4-inch to 5-inch hand grinders
    *Fast and easy to install
    *High Dust Intake leaving little to no dust in the air
    *Clear polycarbonate for improved visibility and durability
    *Removable front edge of shroud for grinding close to wall or edge
    *Brush skirt for improved performance on textured surface

    Fits Most Grinders
    The DustBuddie Dust Shroud fits most four-to-five-inch hand grinders, including Makita, Bosch, DeWalt, and more. Three adjustable spring screws control the height of the DustBuddie, so you can quickly accommodate different grinding wheels and discs. Simply remove the existing guard from the grinder, slip on the DustBuddie, tighten the band clamp, adjust the height, and you’re ready to start your work.

    Efficient and Accurate Grinding
    The DustBuddie Dust Shroud is designed to make your work easier and more manageable. Made of durable, clear polycarbonate for visibility, the shroud rides on a spring cushion, keeping the grinder flat so that dust won’t escape. A short brush skirt improves lateral motion for grinding on uneven or textured surfaces. For further convenience, the shroud’s front lip slides out so you can use the device against a wall. The front lip will easily snap back into place for a quick return to work. And if you’re performing tuck pointing, decorative concrete cutting, or crack chasing, you can add an optional cover plate to help get the job done.

  • 5" Dust Shroud Kit for Metabo Grinders Angle Grinder Hand Grinder Convertible

    $120.44

    *Fits 5″ Metabo Grinders
    *Built for a nice snug fit
    *Dust – Free Grinding
    *Has a convertible feature that folds up allowing you to grind up close to walls for edge work

  • Ermator 7" Dust Shroud for Hand Grinders Red in Color High Grade

    $189.00

    Our dust shrouds fit most hand grinders. The attachment collar with multiple rings supplied with shroud allow the dust shrouds to be attached to every common hand grinder.

    Installs in seconds!! Easily slide the appropriate spacer ring onto the grinder, then slide the shroud onto the spacer. Set your height and tighten the clamp and you’re ready to go. Our point of origin dust shrouds are ideal for all industries where dust collection is needed. They comply with EPA regulations covering lead paint removal and silica dust control. After years of testing and certifications, workers from renovation contractors to masons are using our dust control systems that include shrouds and hoods.

    Features a swivel for easy attachment of 1.5” and 2” hoses, replaceable wear plates and a flip up wall hinge.

  • Heavy Duty Flexible Crush Proof Vacuum Hose w/ Cuffs Use Wet or Dry

    $130.00$275.00

    This crush-proof, highly flexible is economical and non-static conductive. It is an ideal choice for wet or dry pickup and general industrial vacuuming. Our heavy-duty hose offers excellent air flow efficiency to eliminate material build up and static wire to dissipate static electricity.

  • Pulse-Bac 1150 Heavy Duty Dust Collector Vac 4 Concrete Grinder No Dust 225 Cfm

    $3,225.00

    CDCLarue 20 Gallon Pulse-Bac 1150 Dust Collector

    WORKS GREAT WITH ALL INDUSTRIAL EQUIPMENT GRINDERS / POLISHERS ETC.

    Model PB-1150 is a vacuum with a filter fractional efficiency rating of 98.0% @ .3 micron at a CFM flow rate of 200. The 1150 model comes standard with Pulse-Bac® Technology, our Cyclonic Debris Management system, a 20 gal. powder coated tank and a 5 caster steel dolly. An optional tank capacity sensor and three options for collecting debris are also available.

    The 1150 is an industrial grade vacuum that can be used in the vacuuming of fine powders like powder coat, limestone and dry bulky debris or as a dedicated dust collector for manufacturing machinery and surface preparation equipment up to 32” in diameter. Our revolutionary design in vacuum filtration automatically flushes the filters clear while you work, using only ambient air and vacuum. This prevents the filters from facing with dust or debris and clogging during operation. Maintain peak performance with No blowers, shakers, compressors or buttons to push. Just turn it on and go to work Pulse-Bac® technology does the rest.

  • Pulse-Bac 1250 Heavy Duty Dust Collector Vac 4 Concrete Grinder No Dust 311 Cfm

    $4,125.00

     CDCLarue 20 Gallon Pulse-Bac 1250 Dust Collector

    WORKS GREAT WITH ALL INDUSTRIAL EQUIPMENT GRINDERS / POLISHERS ETC.

    Model PB-1250 is a vacuum with a filter fractional efficiency rating of 98.0% @ .3 micron at a CFM flow rate of 311. The 1250 model comes standard with Pulse-Bac® Technology, our Cyclonic Debris Management system, a
    20 gal. powder coated tank and a 5 caster steel dolly. An optional tank capacity sensor and three options for collecting debris are also available.

    The 1250 is an industrial grade vacuum designed to collect, capture and control dust and debris generated by manufacturing machinery and surface preparation equipment up to 54” in diameter. Our revolutionary design in vacuum filtration automatically flushes the filters clear while you work, using only ambient air and vacuum. This prevents the filters from facing with dust or debris and clogging during operation. Maintain peak performance with No blowers, shakers, compressors or buttons to push. Just turn it on and go to work Pulse-Bac® technology does the rest.

Testimonials

“Product works amazingly well so far! I have ~ 1k Sq Ft Condo, and I get compliments all the time on the smell of the place. It adds a crispness to the air that is really pleasant.”

-Jason

Good Smell

“A+ Seller, product as described, thank you! ”

-Wesley

A+ Seller

“The PB 550 arrived sooner than originally anticipated. Great packing and superior shipping service. Highly Recommended Seller.”

-Phillip

Sooner Than Anticipated

“Will order from them again. Received it before the ship date given to me. Thanks!”

-Kristi

Received Faster Than Expected

“No issues, came as described and on time, worked as described.”

-GBL

Worked as Described

” I was trying to meet a deadline and after contacting the seller, they responded quickly and worked their hardest to get my delivery to me early”

-SBridges

Deadline to Meet

“Great company, great dye for brightness and longevity. If you’re carrying your polished concrete further up in the grits this is one of the best to use.”

-RDF

Great Company

“Great place to deal with I highly recommend them”

-Tom Oreilley

Great Place to Deal With

“Overall seems to be a good product as described and color matches image. Note if you are sealing this product it will be darker in tones once finished”

-Oneneptun

 

 

 

 

Customer Feedback

“Great Service, Fast Shipping and Great Prices what more could you need?”

-Gary

Great Service

Why Choose Us?

Diamondblades4us® has been a leading U.S. wholesaler of diamond saw blades, diamond core bits, tuck point blades, turbo blades, loop blades, diamond cup wheels, diamond polishing pads,and other specialty diamond cutting and finishing tools for over 20 years. Our company continues its time honored tradition in supplying the industry with the best diamond blades and other diamond equipment available at the most reasonable pricing.

Theme Settings