Diamondblades4us

makita

  • 4"/ 5" DustBuddie Dust Shroud Kit Fits All Major Brands Angle Grinders

    $99.95

    DustBuddie™ Shroud
    *Fits most 4-inch to 5-inch hand grinders
    *Fast and easy to install
    *High Dust Intake leaving little to no dust in the air
    *Clear polycarbonate for improved visibility and durability
    *Removable front edge of shroud for grinding close to wall or edge
    *Brush skirt for improved performance on textured surface

    Fits Most Grinders
    The DustBuddie Dust Shroud fits most four-to-five-inch hand grinders, including Makita, Bosch, DeWalt, and more. Three adjustable spring screws control the height of the DustBuddie, so you can quickly accommodate different grinding wheels and discs. Simply remove the existing guard from the grinder, slip on the DustBuddie, tighten the band clamp, adjust the height, and you’re ready to start your work.

    Efficient and Accurate Grinding
    The DustBuddie Dust Shroud is designed to make your work easier and more manageable. Made of durable, clear polycarbonate for visibility, the shroud rides on a spring cushion, keeping the grinder flat so that dust won’t escape. A short brush skirt improves lateral motion for grinding on uneven or textured surfaces. For further convenience, the shroud’s front lip slides out so you can use the device against a wall. The front lip will easily snap back into place for a quick return to work. And if you’re performing tuck pointing, decorative concrete cutting, or crack chasing, you can add an optional cover plate to help get the job done.

  • 7" DustBuddie Dust Shroud Kit Fits All Major Brands Angle Grinders Dust Buddie

    $105.00

    DustBuddie™ Shroud
    *Fits most 7-inch hand grinders
    *Fast and easy to install
    *High Dust Intake leaving little to no dust in the air
    *Clear polycarbonate for improved visibility and durability
    *Removable front edge of shroud for grinding close to wall or edge
    *Brush skirt for improved performance on textured surface

    Fits Most Grinders
    The DustBuddie Dust Shroud fits most four-to-five-inch hand grinders, including Makita, Bosch, DeWalt, and more. Three adjustable spring screws control the height of the DustBuddie, so you can quickly accommodate different grinding wheels and discs. Simply remove the existing guard from the grinder, slip on the DustBuddie, tighten the band clamp, adjust the height, and you’re ready to start your work.

    Efficient and Accurate Grinding
    The DustBuddie Dust Shroud is designed to make your work easier and more manageable. Made of durable, clear polycarbonate for visibility, the shroud rides on a spring cushion, keeping the grinder flat so that dust won’t escape. A short brush skirt improves lateral motion for grinding on uneven or textured surfaces. For further convenience, the shroud’s front lip slides out so you can use the device against a wall. The front lip will easily snap back into place for a quick return to work. And if you’re performing tuck pointing, decorative concrete cutting, or crack chasing, you can add an optional cover plate to help get the job done.

  • CDCLarue Dust Grabber Shroud Kit 7″ Built for Select Grinders (SEE LIST)

    $199.00

    CDCLarue Dust Grabber

    CDCLarue Dust shrouds are used on angle grinders and other types of tools that are used to cut, grind or sand. Dust shrouds are a chamber around the abrasive that aids in capturing the dust generated by the tool at the point of generation, all with the assistance of vacuum. Most dust shrouds attempt to seal the shroud to the surface, but once you turn on the vacuum the shroud can become suction locked to the surface which can result in damage.

    CDCLarue patented Dust Grabber shroud eliminates 100% of suction lock, allowing the grinder to float across the surface like a puck on ice. The Dust Grabber is the only shroud that has a lifetime replacement warranty and uses a replaceable polymer seal. The seal creates a vortex of moving air all around the circumference of the shroud from top to bottom, eliminating 100 % of suction lock and capturing 99% of dust. The polymer seal is designed to quickly be replaced when worn out and does not require the abrasive or steel shroud to be removed when replacing the seal. The easy to replace polymer seal cuts shroud replacement cost by 75%.

Testimonials

” I was trying to meet a deadline and after contacting the seller, they responded quickly and worked their hardest to get my delivery to me early”

By: SBridges

Deadline to Meet

“Great company, great dye for brightness and longevity. If you are carrying your polished concrete further up in the grits this is one of the best to use.”

By: RDF

Great Company

“great place to deal with I highly recommend them”

By: Tom Oreilley

Great Place to Deal With

“Overall seems to be a good product as described and color matches image. Note if you are sealing this product it will be darker in tones once finished”

By: Oneneptun

 

 

 

 

Customer Feedback

“Great Service Fast Shipping Great Prices what more could you need?

By: Gary

Great Service

Why Choose Us

DIAMONDBLADES4US has been a leading U.S. wholesaler of diamond saw blades, diamond core bits, tuck point blades, turbo blades, loop blades, diamond cup wheels, diamond polishing pads,and other specialty diamond cutting and finishing tools for over 20 years. Our company continues its time honored tradition in supplying the industry with the best diamond blades and other diamond equipment available at the most reasonable pricing.

Theme Settings