Leading U.S Wholesaler Of Diamond Saw Blades

polished concrete

  • Ameripolish Colorjuice 3D Concrete Dye Exterior Applications


    This is for One Gallon of Product The Hardener and Color included. Covers 400 – 800 sq ft of coverage.

  • (4) 1 Gallon Jugs Kemiko Easy Shine Mop On Wax Protects Rich Shine Sealed Concrete Floor


    Case of 4 – 1 Gallon – Kemiko Easy Shine Acrylic Polymer Liquid Wax (Mop On)

    KEMIKO® EASY SHINE is a low-VOC, extremely user-friendly, waterborne acrylic polymer wax for protecting and maintaining sealed concrete and many other finished substrates. KEMIKO® EASY SHINE is a single component product that is designed to repel water, reduce scuffing and marring. KEMIKO® EASY SHINE allows substrate to breath, is low odor, and produces a deep rich shine.

    KEMIKO® EASY SHINE is applied to properly prepared KEMIKO® or Rembrandt stained floors sealed with KEMIKO® STONE TONE SEALER II, KEMIKO® 100% Solids and Water Base Epoxies, KEMIKO®  SS2700 WB Polyurethane, KEMIKO® SS3300 Aliphatic Polyaspartic and is compatible with many other sealed concrete products. Typical applications include commercial kitchens, grocery stores, restaurants, showroom floors, walkways, and many other interior surfaces requiring additional protection. Excellent replacement product for high VOC solvent base water repellents and sealers with excellent wetting properties. It is not to be applied over KEMIKO® BUFF-ON WAX II.

    Surface Preparation Finished Floor
    All visible oil, grease, sludge, stain residue and any other contaminants shall be removed prior to any KEMIKO® EASY SHINE application. Surface shall be cured, dry and free from any deleterious matter or grime. Use KEMIKO® EASY STRIP to remove heavy wax build up, grease, oils and grime.


  • Xtreme Hard Concrete Densifier and Hardener Strengthen Dustproof (5 Gallons to make 25 Gallons) 15,000 sq ft of coverage.

    $795.00 $725.00

    XTREME HARD DENSIFIER – 5 Gallon Concentrate makes 25 gallons Will Cover 400 – 600 Square Feet per usable gallon (15,000 sq ft) Xtreme Hard™ is a highly reactive Colloidal Silica-based densifying agent. The Colloidal Silica molecule has more reactive sites, so it goes to work quickly, within 1-2 minutes. Spray it on the concrete until the surface is saturated, then agitate with a soft bristle broom. Wait until dry (45-60mins). Xtreme Hard™ is a green, clean and safe material. Its low pH formula (pH approx 8.7, only slightly higher than baking soda) is safer for you to handle. Xtreme Hard emits no Volatile Organic Compounds (VOCs) and eliminates the hazardous-material disposal, so it’s better for the job site and friendlier to the planet.  Xtreme Hard is shipped as a concentrate. One gallon of concentrate makes five gallons of ready-to-use product. Xtreme Hard is the lowest cost densifier per square foot. New Improved Nano Technology Formula, penetrates deeper into the concrete. Coverage:  Will Cover 400 – 600 Square Feet per usable gallon (15,000 sq ft) Just add water.

  • 20″ Concrete Grinder Polishing and Floor Prep Machine 5 HP Concrete Genie

    $6,750.00 $5,995.00

    VOTED THE BEST CONCRETE GRINDER AND POLISHER UNDER  $10,000 QUESTIONS? CALL ME ANYTIME 414-217-2103 FINANCING? WE HAVE VENDORS SETUP TO HELP YOU OUT! Included In Package Deal: (1) Brand New Concrete Grinder and Polishing Machine “The Original Concrete Genie” (2) 1″ Thick Dual Cavity Aircraft Aluminum Magnetic Plates (6) Standard Backed Adapter Pads Needed For Resins Concrete Genie Features: *Gear Driven *Magnetic Heads (House Anyone’s Trapezoids or Metals) *Dimensions: 41″x20″x25″ *25″ Working Width *5HP/220V/1-Phase/15 Amps *1,575 RPM’s *350 LBS *5 HP USA MADE Siemens Motor *Variable speed 0-1500 RPM (Prep or Polish) *Morflex coupler equipped to contour the concrete while grinding and polishing *Aircraft quality aluminum magnetic plates *One Year Warranty against defects *Comes 1/4″ from the edge saving valuable time on edging *Availability of common parts Production Rates: Mastic Removal: 300 Sq. Ft. / Hr Thin Set Removal: 300 Sq. Ft. / Hr Mil Coatings Removal: 75 Sq. Ft. / Hr Concrete Polishing Rates: 300-350 Sq. Ft. / Hr Per Step


“Product works amazingly well so far! I have ~ 1k Sq Ft Condo, and I get compliments all the time on the smell of the place. It adds a crispness to the air that is really pleasant.”


Good Smell

“A+ Seller, product as described, thank you!”


A+ Seller

“The PB 550 arrived sooner than originally anticipated. Great packing and superior shipping service. Highly Recommended Seller.”


Sooner Than Anticipated

“Will order from them again. Received it before the ship date given to me. Thanks!”


Received Faster Than Expected

“No issues, came as described and on time, worked as described.”


Worked as Described

” I was trying to meet a deadline and after contacting the seller, they responded quickly and worked their hardest to get my delivery to me early”


Deadline to Meet

“Great company, great dye for brightness and longevity. If you’re carrying your polished concrete further up in the grits this is one of the best to use.”


Great Company

“Great place to deal with I highly recommend them”

-Tom Oreilley

Great Place to Deal With

“Overall seems to be a good product as described and color matches image. Note if you are sealing this product it will be darker in tones once finished”






Customer Feedback

“Great Service, Fast Shipping and Great Prices what more could you need?”


Great Service

Why Choose Us?

Diamondblades4us® has been a leading U.S. wholesaler of diamond saw blades, diamond core bits, tuck point blades, turbo blades, loop blades, diamond cup wheels, diamond polishing pads,and other specialty diamond cutting and finishing tools for over 20 years. Our company continues its time honored tradition in supplying the industry with the best diamond blades and other diamond equipment available at the most reasonable pricing.

Theme Settings