Leading U.S Wholesaler Of Diamond Saw Blades

(4) 1 Gallon Jugs (Case) of Kemiko Neutra Clean Concrete Stone Cleaner Dirt Gone Concrete

Availability: In stock
SKU: 804551397967


(4) 1 Gallon Jugs (Case)

**Free Shipping to Inner 48 United States**

Benefits Include:

*LEED Compliant
*Low Odor – Low VOC
*Excellent All Purpose Cleaner

Commonly Found In:

*Grocery Stores
*Interior and Exterior Surfaces Requiring Cleaning


KEMIKO® NEUTRA CLEAN is an industrial  strength, low VOC, high performance water base sodium metasilicate Concrete Stone Cleaner for the preparation of bare concrete and coated substrates. KEMIKO® NEUTRA CLEAN is a water viscosity, single component product with a pleasant citrus odor that does not contain any hazardous solvents, is concentrated and diluted with water, and prepares the surface for staining, sealing and re-coating.


KEMIKO® NEUTRA CLEAN is typically applied to concrete substrates to remove deleterious matter such as grease, grime, soil, wall plaster, and other construction related residue. KEMIKO® NEUTRA CLEAN is applied with commercially available pressure sprayers, Concrete Stone Cleaner, or simply poured onto floor and worked into the surface with a stiff bristle brush or floor machine. Typical applications include commercial kitchens, grocery stores, restaurants, showroom floors, walkways, and many other interior and exterior surfaces requiring cleaning.

Surface Preparation Bare Concrete:

Use KEMIKO® NEUTRA CLEAN to remove visible oil, grease, sludge, stain residue and any other contaminants that may impact a Kemiko, Rembrandt or Sta-Crete product application. Apply Kemiko® Neutra Clean to substrate, allow 2-3 minutes to “wet in” then scrub using stiff bristle brooms, brushes or heavy duty fl oor scrubbing machines. DO NOT ALLOW KEMIKO® NEUTRA CLEAN TO DRY ON SURFACE. Once the scrubbing action is completed, rinse surface with clean fresh water. Check surface again to insure all deleterious matter is removed. Repeat application of KEMIKO® NEUTRA CLEAN if necessary. Surface shall be allowed to dry thoroughly prior to any staining, sealing or coating application.

Existing Coatings/Sealers:

Apply small amount of KEMIKO® NEUTRA CLEAN on surface, allow to stand 5-10 minutes and rinse with fresh water. If existing coating or sealer is not affected (removed) by Kemiko® Neutra Clean, proceed as instructed above for surface preparation. ACRYLIC SEALERS MAY BE COMPROMISED OR DESTROYED WITH KEMIKO® NEUTRA CLEAN. Make sure to check compatibility prior to application.

Application Methods

Brush – Use top-quality nylon bristle brush for best film properties.

Floor Machine – Electrical rotary type utilizing soft pads or black, green or white scouring pads for heavy duty cleaning.

Spray – Low pressure “Hudson” type commercial sprayers to apply product followed by scrubbing action.

Environment – Apply between 50°F. – 100°F. and 5°F. above dewpoint. Do not store in direct sunlight. Protect from freezing. Do not apply to wet or frosted surfaces.

Safety – May be irritating to eyes and skin! Wear gloves and eye protection during application. Respiratory protection should be used if airborne concentrations exceed acceptable levels and to insure applicators health. Typically a NIOSH/MSHA certified respirator with organic vapor/HEPA filters should be worn.


Additional Information

Weight 45 lbs
Dimensions 12 x 12 x 12 in



There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.


“Product works amazingly well so far! I have ~ 1k Sq Ft Condo, and I get compliments all the time on the smell of the place. It adds a crispness to the air that is really pleasant.”


Good Smell

“A+ Seller, product as described, thank you! ”


A+ Seller

“The PB 550 arrived sooner than originally anticipated. Great packing and superior shipping service. Highly Recommended Seller.”


Sooner Than Anticipated

“Will order from them again. Received it before the ship date given to me. Thanks!”


Received Faster Than Expected

“No issues, came as described and on time, worked as described.”


Worked as Described

” I was trying to meet a deadline and after contacting the seller, they responded quickly and worked their hardest to get my delivery to me early”


Deadline to Meet

“Great company, great dye for brightness and longevity. If you’re carrying your polished concrete further up in the grits this is one of the best to use.”


Great Company

“Great place to deal with I highly recommend them”

-Tom Oreilley

Great Place to Deal With

“Overall seems to be a good product as described and color matches image. Note if you are sealing this product it will be darker in tones once finished”






Customer Feedback

“Great Service, Fast Shipping and Great Prices what more could you need?”


Great Service

Why Choose Us?

Diamondblades4us® has been a leading U.S. wholesaler of diamond saw blades, diamond core bits, tuck point blades, turbo blades, loop blades, diamond cup wheels, diamond polishing pads,and other specialty diamond cutting and finishing tools for over 20 years. Our company continues its time honored tradition in supplying the industry with the best diamond blades and other diamond equipment available at the most reasonable pricing.

Theme Settings