Leading U.S Wholesaler Of Diamond Saw Blades

W.R. Meadows BELLATRIX Premium Concrete Enhancer Sealer [5 Gallons]

Availability: In stock


Category: .

Tag: .

BELLATRIX – Hardened Concrete Enhancer

Product Data, W. R. MEADOWS

03 05 00
No. 010 Click for .PDF
Related Content:

Material Safety Data Sheet:
Request Literature
Spanish Data Sheet
Project Profiles MSDS

BELLATRIX - Hardened Concrete Floor EnhancerPremium

BELLATRIX is formulated using dual-protection technology combined with unique hybrid polymers, to offer the ultimate in concrete protection. Proprietary, dual-action technology provides the ultimate in both penetrating and film-forming concrete protection. BELLATRIX offers environmentally friendly, VOC-compliant protection, which provides increased stain suspension and resistance against most contaminants found in kitchens, retail food stores, restaurants, malls, garages, warehouses, distribution centers, etc.

While originally formulated to be used in conjunction with hardened concrete, such as W. R. MEADOWS LIQUI-HARD® and the INDUROSHINE™ polished concrete system, BELLATRIX may also be utilized anywhere a clear, high-gloss, dual-action concrete protection system is desired. BELLATRIX is designed for use on previously sealed surfaces, as well as surfaces that have been previously stained or dyed and sealed. (Check compatibility with existing sealer prior to full application.)

  • Permeable film allows moisture in cured concrete to evaporate.
  • Seals surface and provides optimum gloss.
  • Offers stain protection against many common stain-causing contaminants.
  • Produces a tough, uniform, breathable barrier for improved durability.
  • Dustproofs concrete
  • Provides excellent blush resistance in damp environments.
  • Applies easily and economically.
  • VOC compliant.
  • Protects the finish when used on polished concrete.
  • For both indoor and outdoor use.
  • Rejuvenates previously sealed or densified concrete.

1 Gallon (3.79 Liter) Units/4 per Carton
5 Gallon (18.93 Liter) Pails
55 Gallon (208.20 Liter) Drums

500 – 1000 ft.²/gal. (12.27 – 24.54 m²/L)
Steel Troweled Concrete: 500-600 ft.² (12.27-14.73 m²)
Polished Concrete: 1000-1500 ft.² (24.54-36.81 m²)
*Coverage will vary due to texture, porosity and condition of the concrete.

One year in original, unopened container.

  • Complies with all current federal, state, and local maximum allowable VOC requirements, including U.S. EPA, SCAQMD, and OTC.
  • Complies with Canada VOC Concentration Limits for Architectural Coatings Regulations.
May help contribute to LEED credits:

The following results were obtained under laboratory conditions:

Color (Wet): Milky White
Color (Dried): Clear/Transparent
Weight per Gallon, lb./gal: 8.46
pH: 7.31
VOC, g/L 57.6
Drying Time @ 73° F, 50% RH 1-2 hours***
Re-coat time: 2-6 hours
Foot Traffic: 4-6 hours
Wheel Traffic: 6-12 hours
Adhesion to Concrete: Excellent
Ultraviolet light (UV) degradation tested to ASTM C 1315, 8.86:
Ultraviolet Resistance: Non-yellowing
Chalk Resistance: No chalking
Check/Peel Resistance: No deterioration
**All technical data is typical information, and may vary due to test methods, conditions and operator technique.
**Low concrete or air temperatures and/or high relative humidity will extend drying times.

BELLATRIX is formulated to provide a reasonable amount of time for cleanup and removal of spills. Prior to that removal, BELLATRIX will provide a barrier to the following contaminants:

Evaluation Scale: E = Excellent, V = Very Good, G = Good, F = Fair, P = Poor
24 Hour Stain Resistance
Untreated Concrete LIQUI-HARD and
Used Motor Oil
Diesel Fuel
Ammonium Hydroxide
Phosphoric Acid
Pickle Juice
Salad Dressing
Grape Juice
BBQ Sauce
Hot Sauce
**Under laboratory conditions, using a two (2) coat application of BELLATRIX at 500 ft.²/gal. over concrete treated with LIQUI-HARD. To determine the optimum results, it is recommended that different dilution rates be tested in the field and evaluated for gloss and stain-resistance properties.

BELLATRIX is designed for existing concrete and should not be used as a curing compound on freshly placed concrete. A small test patch application is always recommended. The test patch must be done using the same applicator (personnel), equipment, surface preparation, application technique, and at the same temperatures, relative humidity, airflow conditions, etc., that will exist at the time of the full-scale BELLATRIX application.

Surface Preparation … The surface must be thoroughly clean, dry and free of anything that will prevent BELLATRIX from bonding properly with the concrete. This includes, but is not limited to: bond breakers, release agents, coatings, oil, grease, unneutralized acid stain, dirt, efflorescence, dust, etc.

Polished Concrete … BELLATRIX may be applied over concrete that has been previously treated with a densifier/hardener such as LIQUI-HARD and/or polished with a system like INDUROSHINE. Concrete must be a minimum of 28 days old before polishing with INDUROSHINE. Allow a minimum of 12 hours after a LIQUI-HARD treatment before applying BELLATRIX. Best results are obtained if the surface is burnished two hours after application of BELLATRIX. Use a high speed burnisher with a 3000-grit or hogs hair pad. If products or systems other than INDUROSHINE or LIQUIHARD are used, a small test patch application is always recommended.

Existing Concrete … BELLATRIX should be used full strength on existing concrete (no dilution necessary). Concrete must be a minimum of seven days old before applying BELLATRIX. The concrete must be clean, dry and prepared, per Surface Preparation instructions above.

Mixing … Any separation in the container must be re-dispersed with gentle agitation prior to use. CAUTION: TO AVOID FOAMING, DO NOT MIX EXCESSIVELY.

Application Method … An industrial sprayer, such as a Chapin 1949, with a 5916 spray nozzle (or equivalent), delivering 1/10th of a gallon per minute, is recommended. Application equipment must be clean, dry and free of any previously used materials. After initially spraying the product onto the surface, uniformly spread it with a micro-fiber applicator. The micro-fiber pad should be prewetted with BELLATRIX prior to use, and the product must not be allowed to dry before spreading is complete. Optimum performance is achieved with two (2) uniform coats. The second coat should be applied at a 90° (right) angle to the first coat, only after the first coat is thoroughly dry – typically six (6) hours after application, depending on temperatures and conditions. NOTE: Keep surface dry for a minimum of 48 hours after application; full stain blocking ability will not be effective until 72 hours after final application.

Cleanup … While BELLATRIX is still wet, equipment can be cleaned with soap and water. Once dried, the material can be removed with a solvent, such as xylene or toluene.

KEEP FROM FREEZING. Do not use BELLATRIX as a curing compound on freshly placed concrete. Do not use as a stand alone product. Due to occasional uncontrollable variations in  substrates, application error, etc., BELLATRIX may not block all staining materials in every instance. BELLATRIX is formulated to provide a reasonable amount of time for cleanup and removal of spills. Do not apply when air, material or surface temperatures are expected to fall below 40? F (4? C) within four hours of completed application. DO NOT MIX WITH ANY OTHER PRODUCTS.

Stain resistance and gloss will vary with changes in dilution ratios, coverage rates and with the nature of the substrate. A test area is recommended to verify that the desired appearance and performance is achieved with the intended use conditions.

Direct contact may result in mild irritation. Inhalation may cause irritation of the respiratory tract. Refer to Material Safety Data Sheet for complete health and safety information.

This material last updated September 2010.

Additional Information



Country/Region of Manufacture




“Product works amazingly well so far! I have ~ 1k Sq Ft Condo, and I get compliments all the time on the smell of the place. It adds a crispness to the air that is really pleasant.”


Good Smell

“A+ Seller, product as described, thank you! ”


A+ Seller

“The PB 550 arrived sooner than originally anticipated. Great packing and superior shipping service. Highly Recommended Seller.”


Sooner Than Anticipated

“Will order from them again. Received it before the ship date given to me. Thanks!”


Received Faster Than Expected

“No issues, came as described and on time, worked as described.”


Worked as Described

” I was trying to meet a deadline and after contacting the seller, they responded quickly and worked their hardest to get my delivery to me early”


Deadline to Meet

“Great company, great dye for brightness and longevity. If you’re carrying your polished concrete further up in the grits this is one of the best to use.”


Great Company

“Great place to deal with I highly recommend them”

-Tom Oreilley

Great Place to Deal With

“Overall seems to be a good product as described and color matches image. Note if you are sealing this product it will be darker in tones once finished”






Customer Feedback

“Great Service, Fast Shipping and Great Prices what more could you need?”


Great Service

Why Choose Us?

Diamondblades4us® has been a leading U.S. wholesaler of diamond saw blades, diamond core bits, tuck point blades, turbo blades, loop blades, diamond cup wheels, diamond polishing pads,and other specialty diamond cutting and finishing tools for over 20 years. Our company continues its time honored tradition in supplying the industry with the best diamond blades and other diamond equipment available at the most reasonable pricing.

Theme Settings